Stock Code: LED003
INPUT: 110~240V AC 680mA 50-60Hz
OUTPUT: 12V 20A 240W
Working Temperature: 0~40C
Storage Temperature: -20~60C
Ambient Humidity: 0~95% Non-Condensation
Depending on batchactual Power supply may look different from the picture
IN-DOOR USE ONLY!
No installation instruction,wiring cable, on/off switch, orscrews.
Professional Installation of qualified electrician ishighly recommended. adaptor designed specifically for our LED strip l
ight. Please DO NOT let the unit worklong hours over rated current!
Whenpurchase the switch, please make sure the power is lower than or equal to therated power supply, otherwise it may be damaged.
Please DO NOT let the unit worklong hours over rated current!
When purchase the switch, please make sure the power is lower than or equal to the rated power supply, otherwise it may burn, if youare not sure about the power supply, pls contact us, we will respond you asap!
When using keep adequate ventilation.
Input voltage: AC100V---240V
Input frequency: 50-60Hz
Input surge: 20A@120VAC 40A@230VAC
Output voltage: DC12V ±10%
Start-up time: <1S(input230V Io=100%)
keep time: >20mS (input230V,Io=100%)
Voltage regulation:(Full load) <0.5%
Overload protection: 105% - 150% rated power, automatic recovery
Over-voltage protection: 105% - 150% of the rated voltage
Safety standards According with GB4943, UL60950-1,EN60950-1 standards.
EMC standards According with GB9254, EN55022 class A EN61347-2-13:2008 standards
working temperature: - 20 ° ~ 60 ° c / 20% ~ 90% RH (no frost)
Storage temperature: - 40 ° ~ 85 ° c / 10% ~ 95% RH (no frost)
output specification :DC12V 20A 240W
ripple wave , noise :100mV